对位指将相应的缝线两边对应，是缝线的两衣片中经纬线位置，缝线的长度以及摆的加放量或其加放量的相互匹配的过程。

Alignment refers to the corresponding suture on both sides of the corresponding, is the suture of the two pieces of clothing in the latitude and longitude line position, the length of the suture as well as the pendulum with the volume or the amount of the mutual matching process.

2 闭合省道：
2 closed highway:

闭合省道常用于实际的省中，指将省道的一边向另一边折叠，将收省量缝合至省尖。表示以胸高点或省尖折叠，缝制省道。

Closed dart is often used to the actual Province, the provincial side to side folding, will receive the amount of suture to tip. Said to the bust point or tip folding, sewing darts.

3 拷贝：
3 copy:

将一张薄的拷贝纸放于各原型样板上，为防止移动，用大头针固定，并用合适的工具拷贝各缝线，各交点记号等等。

A thin copy paper put on the prototype, in order to prevent the mobile, fixed with a pin, and use the right tools copy each suture, the intersection of mark etc..

4 标记：
4 mark:

指与缝合线、省线、褶线等相交的一条短线，以暗示缝线相连，作为线条对位时用的记号。

Refers to the suture line, the provincial line, fold line and so on the intersection of a short line, in order to imply that the suture is connected, as a mark of line alignment.

5 剪切：
5 shear:

当拷贝或作轮廓线后，剪去原型或纸样上该线外侧部分，而保留原线迹。

When a copy or contour line, cut the line pattern on the prototype or the outer part, while retaining the original stitch.

6 省道：
Highway 6:

省道是“v”字形的，在其一端有一定宽度，另一端逐渐缩小为点，“v”形被缝合时线迹的距离称为省宽或折量。

The dart is a "V" shape, with a certain width in the end, the other end is gradually reduced, the shape of "V" by the suture stitch distance is called the province wide or discount amount.

7 打孔：
7 punch:

常用锥子作的标识，在样板或纸样上某特殊点而打的小圆孔。

The commonly used awl logo, a special point a small hole in a template or pattern.

8 v 型剪口：
8 V type shear port:

用剪刀在缝合线的缝头边剪作的 ! 形剪口，它用于已倒成的纸样上。

With a pair of scissors at the suture line as the joint head cut! Cut it for shape, has poured into the pattern.

9 画轮廓线：
9 draw contour lines:

描绘无缝头的样板或纸样边际线的过程。

The process model or pattern of marginal lines painted in the head of seamless.

10 点 画 线：
The 10 point line:

用点线轮将纸样各线画在另一张纸或对折的纸面上，将对折样板打开或分离开，用铅笔或其它适当工具描画出点线痕迹。

With the line wheel pattern each line drawn on another piece of paper or folded paper, the folded model opened or separated with a pencil or other appropriate tools to draw line traces.

11 核对：
11 check:

连接纸样上的各点，并检查测量省线、缝合线、标记点等等。

The connection pattern of each point, and check the measuring lines, suture, markers and so on.